SURFCOM TOUCH 35/40/45 The system is available with three small and light weight skidded tracing drivers for measurement with different attitudes. In addition to horizontal surfaces, measurement on vertical surfaces can be performed in narrow areas with a transverse trace.
SURFCOM TOUCH 35
Standard type
The standard-type with different attitudes to measure horizontal, inclined, vertical and ceiling surfaces.
SURFCOM TOUCH 40
Retraction type
Retract-type that reduces damage to the stylus and pickup by raising the pickup while waiting for measurement or at the end.
SURFCOM TOUCH 45
Horizontal tracing type
The transverse trace-type where the pickup moves sideways.
Technical Data
| Features | Measurement |
|---|---|
| Z Direction | SURFCOM TOUCH 35: -210 to +160 μm SURFCOM TOUCH 40: -210 to +160 μm SURFCOM TOUCH 45: -210 to +160 μm |
| Drive Axis | SURFCOM TOUCH 35: X direction 16 mm SURFCOM TOUCH 40: X direction 16 mm SURFCOM TOUCH 45: Y direction 4 mm |
| Evaluation Length | SURFCOM TOUCH 35: 0.2 to 16 mm SURFCOM TOUCH 40: 0.2 to 16 mm SURFCOM TOUCH 45: 0.2 to 4.0 mm |